Flash-Curing Device for Photopolymerisation Rapid and reliable curing of light-curable resins   Advantages  Two flashbulbs 10 very intensive light-flashes per second between 280-580nm Short curing times Polymerizes all light-curable materials Enables the production of light curable workpieces of different consistencies and pigmentation as well as the implementation of UV-lacquering 1 year warranty        Specifications  Dimensions of polymerisation chamber: 120*120*50 (mm) Number of light sources: 2 flash bulbs 100w Capacity: 4 BTE-aids or 6 ITE-aids Rated voltage: 100, 117, 230 volt AC, adjustable by switch Rated frequency: 50/60Hz Power input: 250watt Spectral distribution: 280-700 nm, maximum between 400 and 500nm Average flash power: 200watt Flash frequency: 10 flashes per second Digital timer: adjustable from 1 to 9.999 flashes Dimensions: 310*310*140 (mm) Weight: approx. 7kg       Click here to see the brochure.

Read more less

  Twin Tornado 3D Printing Wash  Double Power Double EfficientFirst & Second Wash Process    Advantages Double performance (Two cleaning containers) Easy and straightforward user interface Flexible adjustment for your 3D printer's plates - mesh container or universal jig for plateTransparent plastic containers 3 Programmed mode - 3min, 5min, 10min    Specifications Color: Black Magnetic Spin Size: 25 x 25 x 35cm Universal jig: 18 x 9cm Weight: 3KG Power: 48W Voltage: AC100-240V, 50/60Hz Packing 1 x Main body 2 x Cleaning container 2 x Universal jig and mesh container  Tutorial Video - https://youtu.be/-Z3f0FeUrPACleaning tip Put the build plate of the 3D Printer to the tank Pour the IPA (isopropyl alcohol) to the build plate to soak Remove the printed models after wash from the build plate Maintenance tip When cleaning result is not good due to milky used IPA, pour out clear IPA to the another bottle when it is settled Clean the wash tank, fill with used IPA and top up with new IPA Exchange first tank and second tank  

Read more less

  Twin Cure 3D Printing Cure Stable and Fast Cure  Double Wavelength - 365 & 405nm      Advantages Double wavelength (365 & 405nm)  6 way light irradiation with 55 LED lamps Wide chamber (D14 x 10cm) Auto Turntable Adjustable time - 3min, 5min, 10minAdjustable power - low, medium, high     Specifications Color: Black Auto turntable Size: 25 x 25 x 25cm  Weight: 3KG Power: 65W Voltage: AC200-240V, 50/60Hz    Packing 1 x Main body 5 x LED array   2 x LED on the lid       

Read more less

Textured silicone helps minimize internal slippage and movement Removable silicone - easy to clean The magnetic ensures that the case is firmly fixed Dimension: W8.8 H2.5 (cm) Color: Case-Black/ Silicone-Blue

Read more less

The Ultimate 3-Day Crash Course in Dental 3D Printing and Digital Design Sydney's premier dental 3D printing course is back again, and even more comprehensive than ever before, with now 3 day's worth of hands-on printing and digital design education. Learn how to integrate additive 3D printing technologies into your practice safely, efficiently and effectively! This course is designed for 'zero' experienced dentists, so that attendees with zero prior printing and design knowledge will be able to design and print all fundamental applications possible in general dentistry when they return to their practices.   The Speaker: Dr. Andrew Ip BDS, MRACDS (GDP), Grad Dip Orthodontics (JCU), MSc Implantology (IMC), PGrad Dip Digital Dentistry (IDDA) Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022.Nerd, geek, freak - he's been called it all.What was once a simple hobby now takes up a significant portion of his daily work.Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies   Course Curriculum  (DAY 1) 9 May 2025 (Friday) 9AM - 5PM 3D printers – an overview:      •Types of 3D printing technology       •Factors to consider when investing into 3D printing       •Design – in-house or outsource?      •What can we 3D print? The armamentarium:      •Printers       •Wash units       •Cure units       •The importance of validated protocols and the TGA Models:      •Basic model preparation for 3D printing – Medit Model app       •Nesting – positioning, angulation and supports Physical printing workflow:      •Printer set up       •Loading resin      •Washing      •Curing      •Material handling Print failures:      •Common failures       •What to do when there is a failure   (DAY 2) 10 May 2025 (Saturday) 9AM - 5PM 3D printed restorations – an overview:       •The case for 3D printed   restorations       •The physical properties of 3D   printed restorations      •Temporary vs Permanent – what   should I tell my patient? Design – the single crown:       •Live demo and hands-on exercise –   Medit ClinicCAD       •Live demo and hands-on exercise –   Dentbird AI      •Demo – Exocad Design – multi-unit bridge:      •Live demo and hands-on exercise –   Medit ClinicCAD     Design – 3DFreeForm (indirect palatal shells):      •Live demo and hands-on exercise –   MeditClinicCAD     Design – full dentures:      •Demo – Blue Sky Plan Design – injection moulding trays      •Live demo and hands-on exercise –   Medit ClinicCAD      Nesting and slicing:      •Proper orientation and supports   Post-print processing workflow:      •Washing      •Curing      •Polishing and/or characterization   (DAY 3) 11 May 2025 (Sunday) 9AM - 5PM Same-day splints:       •Live demo – from scan to design to print       •Hands-on exercise – splint design – Medit Splints       •Printing materials and considerations      •Post-processing Mouthguards:      •Why printed mouthguards      •Hands-on exercise – mouthguard design – Medit Design       •Printing considerations In-house clear aligners:      •Why in-house aligners       •Basic overview, workflow and practical considerations       •Design – who does what Guided surgery:      •Pro’s and Con’s of guided surgery       •What information do you need      •Settings – what do all these parameters mean?      •3D printing considerations – orientation, supports and post-print processing The single implant:      •Live demo and hands-on exercise – immediate extraction and surgical guide design – Blue Sky Plan       •Live demo – implant planning, surgical guide design and provisional restoration – Exoplan and ExocadImplant provisionalization:       •Live demo and hands-on exercise – Maryland bridge      •Live demo and hands-on exercise – nesbit/flipper   Course Details 9 - 12 May 2025  (FRI - SUN) 9AM - 5PM 7 CPD hours each / Total 21 CPD CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST each module (1 day) AUD 3,000 + GST for all modules (3 days) AUD 500 + GST for Additional Associate Dentist (or Auxiliary Staff) each module AUD 200 + GST for Lecture Retake each module Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience***    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588    *Images are designed by Pop Artist Painter, Dr. Andrew Ip.

Read more less

3D Printer for Dental Professionals & Biocompatible Applications A dental-specific 3D printer with an easy-to-use design for dental professionals to simplify and accelerate workflows. SOL is validated with the most popular resins to print dental models, permanent/temporary crowns, splints, guides, gingiva, dentures, and other applications. *Concierge Service - Remote Installation, Onboarding Training and Support included Flyer    Quick Start Guide Compatible Resin   Specifications   FAQs Biocompatible Dental Workflows SOL's technology allows dental experts to print over 10 validated biocompatible dental applications, including temporary and permanent crowns, splints, guards, dentures, surgical guides, and more. Say goodbye to user error and hello to effortless, in-house precision.   Unbelievably Fast Print Times Print surgical guides, splints, dentures & more 3 times faster than leading SLA printers, with stunning accuracy thanks to our 54 LEDs and 95%+ light uniformity. Save time and boost efficiency for perfect biocompatible results. Multiple Build Platforms for Each Dental 3D Printing Need Have the flexibility to print high-volume model batches or lightning-fast C&B with our first-in-the-industry L, M, & S Build Platforms. Print a full arch up to 40% faster with M, or whip up crowns in only 20 minutes* with S. Elevate your workflow with unprecedented flexibility!*Values can vary depending on resin selection and printing settings   Smart LED for a Dynamic Optical Engine Say goodbye to uneven curing and screen burnout. SOL's dynamic backlight precise light guidance cures only where needed, boosting accuracy, saving energy, managing heat, and extending screen life. Experience high-precision 3D printing without worrying about your printer's life.     Introducing Ackuretta Concierge Service  Extended 3D printer warranty Unlock an additional one year warranty extension that takes your standard warranty to 2 years of comprehensive coverage. Priority session bookings Dive straight into our premium 3D printing support. With our priority session bookings, your needs take the forefront. Experience unmatched service speed and dedication. Support available on demand Need Help? Reach our multilingual team of experts and book a live video call session for real-time dental 3D printing guidance. Exclusive learning & training resources From 1 on 1 training to tailored dental application workflows, we will equip you with essential tools and skills that will elevate your capabilities.   *According to the new promotion, the external heater will be provided. 

Read more less

AI-Powered Slicing Software ALPHA AI is fully integrated with the most popular CAD design software, including 3Shape, Clinux, Exocad, and Medit. Easily orient, stack, nest, and build supports for dental 3D prints with just one click. Export your ready-to-print STL files for third-party 3D printers. Download ALPHA AI for Free and Get Started         Flyer       How to Download and Upgrade       System Requirements          Easy to Learn, Effortless to Delegate - No training Needed ALPHA AI allows dental professional to rely on their support staff to easily access the AI module for dental applications and increase efficiency and patient satisfaction.     Higher Rate of Successful Prints – Save Resin and Labor Time No more failed prints: About 75% of failed prints are caused by incorrect orientation during file prep. With ALPHA AI Premium, we are maximizing your print success rate with auto-orientation, saving you time and resin.     Export 50 STL Files for Universal Compatibility By-pass not user-friendly and less accurate slicing software, and take full advantage of ALPHA AI’s unique features - export up to 50 STL files monthly monthly to increase your success rate.     Different Prints & Multi-selection Compatible Excel in dental 3D printing. Generate the proper supports and determine the optimal orientation - whether it’s stacking duplicated or different applications, your staff will love it!

Read more less

[Small] Ideal for Crowns, Bridges and small Guides.  The build platform is machined from a solid piece of aluminum and provides a base for your prints to be securely attached to as they are printed.    [Medium] Ideal for Full-Arch applications.  The build platform is machined from a solid piece of aluminum and provides a base for your prints to be securely attached to as they are printed.    [Large] The build platform is machined from a solid piece of aluminum and provides a base for your prints to be securely attached to as they are printed. 

Read more less

  Vat for SOL 3D Printer with Vat Box 

Read more less

The Ultimate Biocompatible UV Curing Oven Nitrogen-enabled UV curing oven that delivers prints with enhanced mechanical properties, optimal transparency, and improved colors and smoothness. Cure biocompatible applications like permanent and temporary crowns, inlays, onlays, and more. Fit up to 8 full arches applications at once for high-production needs.   Flyer    Quick Start Guide   s pecifications   How to Cure with N2   Compatible Materials Compare UV Ovens   Engineered for High-Production and Biocompatible UV Curing Workflows   Biocompatible Dental Workflow CURIE Plus is a certified Class IIa biocompatible curing unit that guarantees reliable results with industry-leading dental resins, enabling exceptional restorations.      Enhanced Mechanical Properties Up to 25% with N2 Compatible with a range of nitrogen sources, CURIE Plus boosts print quality by enhancing mechanical properties, improving color transparency, and smooth finishing.     Up to 8 Full Arches Capacity Power up your dental printing production. Engineered to maximize your efficiency, CURIE Plus can cure up to 8 full arches at once, aligning with SOL's printing capacity.       No Flipping Required CURIE Plus' 360º uniform light distribution and 365, 385, and 405 nm UV wavelength coverage ensure each print layer is thoroughly cured in a single process*Prints with BEGO resins need to be flipped

Read more less

Dual Tank Washer for Dental 3D Printing Unleash the productivity of your dental practice with CLEANI. Save time and 50% alcohol while removing 90% of resin residue in a gentle, two-stage process. Clean platforms and prints together, minimizing damage and boosting workflow efficiency.   Flyer   Quick Start Guide   Specifications Shipping Restrictions    FAQs What Makes CLEANI with Dual Tanks the Washer You Need? Perfect for Biocompatible Workflows The versatile two-stage cleaning process guarantees a safe and hygienic wash for your 3D-printed applications, such as crowns, bridges, splints, surgical guides, denture bases, teeth, and models, among many others. It is ideal for both biocompatible and non-biocompatible rigorous workflows.       2-In-1: Clean Both Your Build Platform and Applications Save time and alcohol consumption with CLEANI's smart design. Accommodate a wide range of build platforms with the 3D prints still attached for a simultaneous wash process.       4 Full Arches Capacity Elevate your washing capabilities while still reducing alcohol consumption. CLEANI can wash up to 4 3D printed full arches at once.       Alcohol Consumption Cut by Half CLEANI Dual Tank washer enables a dirty and clean wash to reduce alcohol consumption by 50% and eliminate the need for frequent refills when using various resins.

Read more less

3D Printer Powerhouse for Digital Dentistry Designed to supercharge dental 3D printing workflows. Experience SOL Plus' unmatched throughput - ideal for clinical full-arch dental models, and validated best-in-class resins - all in one easy-to-use table-top package that can also print biocompatible permanent crowns, bridges, splints, dentures, and more. *Concierge Service - Remote Installation, Onboarding Training and Support included Flyer  Quick Start Guide  Compatible ResinsSpecifications FAQs                What Makes SOL Plus the Dental 3D Printer You Need?   Unmatched Throughput for High-Production Requirements Engineered to efficiently print up to 8 clinically accurate dental models at a time horizontally, or 28 vertically in less than 4 hours. SOL Plus is a powerhouse printer that enables high-production dental offices to print up and satisfy even the most demanding workflows    High-Capacity Biocompatible Dental Workflows Designed to make dental workflows intuitive. Print over 10 validated dental applications with guaranteed biocompatibility with our plug-and-play printer. Its open system makes it compatible with dental crowns, splints, guards, dentures, surgical guides, models and more.    3D Printing Technology that Delivers Reliability SOL Plus' Dynamic Backlight System delivers highly efficient UV light only precisely where needed - boosting print accuracy, saving energy, managing heat, and thus, letting you print for much longer without having to worry about screen burnout or unevenly cured prints!        Heating Rod: Enhanced Results, Maximum Resin Compatibility Truly the industry's fastest resin heater (2 °C per minute). Boost efficiency, optimize performance, and unlock nanoceramic hybrid resin workflows for permanent applications. Faster than heating belts, heated build plates, ceramic heaters, air controller heaters, etc.   One-Hand Operation - Workflows Made Easy Streamlined ergonomic one-hand workflows and intuitive touch controls. Our innovative build platform lock calibrates the platform on its own and minimizes user error. Automatic build platform tilting after printing for easy dripping in vat, resin saving, and clean results.          

Read more less

High-Volume Washer for Dental 3D Printing Unleash high-capacity dental workflows with CLEANI with Tank Plus. Remove the majority of the resin residue in a gentle and short process that minimizes alcohol submersion. Save time and enjoy high-volume efficient cleaning for your 3D-printed dental applications. Flyer   Quick Start Guide Specifications   What Makes CLEANI with Tank Plus The Washer You Need?   Made to Match Our New 3D Printing Solution Plus With Tank Plus, our alcohol washer becomes the perfect fit for our new 3D Printing Solution Plus - wash up to 8 full-arch applications in one go to match the high production that SOL Plus and CURIE Plus deliver perfectly. Ideal for High-Volume Production Thanks to it's high capacity and fast washing cycle, Tank Plus makes CURIE the perfect washing unit for demanding digital dentistry workflows. Enjoy a Short 5-Min Wash Cycle Complete an entire washing cycle in just 5 minutes. With Tank Plus, enjoy the advantage of swiftly washing high-volume 3D printed applications in record time.

Read more less

Meet  The Perfect Complement of  Say goodbye to nitrogen tanks with the NFinity Nitrogen Generator. This desktop system supplies CURIE Plus with endless nitrogen cycles, enhancing the curing process to deliver superior mechanical strength and aesthetic results.   Safe & Reliable NFinity generates nitrogen whenever needed, eliminating the need to store large quantities of pressurized gas, ensuring a safer working environment for your dental office or lab. Space-efficient Built specifically for dental 3D printing, its compact footprint is perfect for any workspace. 95% Nitrogen Purity By introducing 95% pure nitrogen gas into the curing chamber, NFinity creates an oxygen-free environment that maximizes UV light absorption, ensuring exceptional print results. Unlimited Nitrogen Escape the cycle of buying nitrogen tanks with the convenience of an unlimited supply of high-purity nitrogen.   CURIE Plus & NFinity: Curing Process Learn how to set up your NFinity and connect it to CURIE Plus to enjoy the benefits of curing your dental applications with nitrogen - including enhanced esthetics and mechanical properties.       Flyer CURIE Plus FAQ & Quick Start Guide NFinity FAQ &Quick Start Guide Specifications Shipping Restrictions Compatible Materials Compare UV Ovens

Read more less

Type 360N2 with UV B block  Transparent 360-950nm  Compatible with Otoflash G171 

Read more less

Single Unit Printed and Milled - Single and Ready to Mingle Swipe Right on In-House Indirect Dental Restorations! It’s a big ocean out there and everyone’s looking for their fish. Calling out all you dental pros who know the struggle of getting indirect single-unit restorations right! Are you tired of dealing with outdated methods and longing for some real precision in your life? Well, honey, it’s time to ditch the drama and upgrade your game!"Single and Ready to Mingle" is your match made in dental heaven and is the first event for a reinvigorated Bread and Butter Digital Dentistry Study Club – a sassy, hands-on educational program where milling and 3D printing come together to create the perfect restoration every time.   What’s in it for You? Flawless Workflow: Learn how to mill and print like a pro—no ghosting, no excuses. Swipe-Worthy Results: Create single-unit restorations so stunning with simple and replicable staining techniques, they’ll have your patients smiling ear-to-ear. Tech with Benefits: Get cozy with the latest gadgets and software that make your job easier (and way more fun). We’ve got the tools, the tech, and the vibes. All we’re missing is you! Get ready to mill, print, stain and glaze darlings! Who’s Invited? Dentists, lab techs, and anyone in the dental world who wants to level up their skills and have a little fun while doing it. Don’t ghost us—RSVP today! The Speaker: Dr. Andrew Ip BDS, MRACDS (GDP), Grad Dip Orthodontics (JCU), MSc Implantology (IMC), PGrad Dip Digital Dentistry (IDDA) Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022.Nerd, geek, freak - he's been called it all.What was once a simple hobby now takes up a significant portion of his daily work.Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies   Course Curriculum  Introduction to in-house CAD/CAM Hardware,   software and materials Advantages, disadvantages and considerations Crash course on milled restorative materials Wet   vs dry milling Non-fired materials Fired materials Crash course on 3D printed restorative materials Indications   and limitations Print considerations and workflow Design – hands-on with crowns, onlays and inlays Medit   ClinicCAD Dentbird AI Exocad Post-processing Polishing   vs staining – demo Staining an anterior crown – hands-on Staining a posterior tooth – hands-on Polishing a posterior crown – hands-on   Course Details 13 June 2025  (Sunday) 9AM - 5PM 7 CPD hours each / Total 21 CPD CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST each module (1 day) AUD 500 + GST for Additional Associate Dentist (or Auxiliary Staff) each module AUD 200 + GST for Lecture Retake each module Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience***    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588    *Images are designed by Pop Artist Painter, Dr. Andrew Ip.

Read more less

The Bread and Butter Digital Dentistry Study Club TGA Requirements for Dentists and Clinicians Doing in-house CAD-CAM   The Speaker: Dr. Andrew Ip BDS, MRACDS (GDP), Grad Dip Orthodontics (JCU), MSc Implantology (IMC), PGrad Dip Digital Dentistry (IDDA) Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022.Nerd, geek, freak - he's been called it all.What was once a simple hobby now takes up a significant portion of his daily work.Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies   Course Details 12 February 2025  (Wednesday) 7:00 PM - 8:30 PM CM MEDICAL Office or Online Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Refreshment and Snacks will be provided   Course fee AUD 25 + GST for Offline or Online Attendees    Registration  Please purchase this item from our website Zoom link will be provided to attendees     Important Registration feel cannot be refunded  Private Zoom recorded video will be shared to attendees only     Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588    *Images are designed by Pop Artist Painter, Dr. Andrew Ip.

Read more less

The Bread and Butter Digital Dentistry Study Club Staining and Glazing Night   The Speaker: Dr. Andrew Ip BDS, MRACDS (GDP), Grad Dip Orthodontics (JCU), MSc Implantology (IMC), PGrad Dip Digital Dentistry (IDDA) Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022.Nerd, geek, freak - he's been called it all.What was once a simple hobby now takes up a significant portion of his daily work.Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies   Course Details 9 April 2025  (Wednesday) 7:00 PM - 8:30 PM CM MEDICAL Office or Online Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Refreshment and Snacks will be provided   Course fee AUD 25 + GST for Offline or Online Attendees    Registration  Please purchase this item from our website Zoom link will be provided to attendees     Important Registration feel cannot be refunded  Private Zoom recorded video will be shared to attendees only     Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588    *Images are designed by Pop Artist Painter, Dr. Andrew Ip.

Read more less

Exocad Training - Smile Design and Snap On      The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 2 May 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

The Bread and Butter Digital Dentistry Study Club Splints / Nightguards Workshop       The Speaker: Dr. Andrew Ip BDS, MRACDS (GDP), Grad Dip Orthodontics (JCU), MSc Implantology (IMC), PGrad Dip Digital Dentistry (IDDA) Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022.Nerd, geek, freak - he's been called it all.What was once a simple hobby now takes up a significant portion of his daily work.Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies   Course Details 2 July 2025  (Wednesday) 7:00 PM - 8:30 PM CM MEDICAL Office or Online Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Refreshment and Snacks will be provided   Course fee AUD 25 + GST for Offline or Online Attendees    Registration  Please purchase this item from our website Zoom link will be provided to attendees     Important Registration feel cannot be refunded  Private Zoom recorded video will be shared to attendees only     Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588    *Images are designed by Pop Artist Painter, Dr. Andrew Ip.

Read more less