Scanning Reimagined The Medit i700 is the key to unleash your clinic's full potential, with powerful hardware and intelligent software. ​The Medit i700 makes the scanning experience a comfortable one for both dentist and patient.       Medit Plug & Scan Unlike the most scanners in the market, Medit i700 can be directly connected to the PC using power delivery cable without power hub and extra cables. This new feature of Medit i700 improves the mobility and the maintenance.(Minimum system requirement : USB Type-C / USB Power Delivery 5A, 3V Power delivery support)   Medit Link Medit Link is a fully open system for you Scan with intelligent features and apps specialized for your dental procedures.Improve consultation experience with your patient to provide better treatment options.Enhance your communication with labs through a real time could-based system. Medit i700 Specifications Category Medit i700 Scanning technology Scanning frame Up to 70 FPS Imaging technology 3D-in-motion video technology l 3D full-colour streaming capture Light source LED Anti-fogging technology Adaptive anti-fogging Accuracy Full-arch 10.9μm ± 0.98 Handpiece Dimensions 248 x 44 x 47.4 mm Weight 245 g Tip Tip size 22.2 x 15.9 mm Mirror angle 45-degree angle Easier to scan distal molar area Scan area 15 x 13 mm Autoclavable Up to 100 times Autoclave 121°C 30 mins l Autoclave 134°C 4 mins Reversible Tip Yes Special mode Remote control mode Yes UV-C disinfection Yes Cable Length 2.0 m / Handpiece Detachable Connectivity USB 3.1 Gen1 (C Power Delivery)   Recommended High Performance System Requirements Recommended Baseline System Requirements Here is what some users have to say about Medit:         

Read more less

  EDGE boasting its compact, unique design and robust performance is a prompt and stable scanner that reliably supports all the features you need to create a prosthesis.It is a 1.3-megapixel scanner that uses the area scanning method to acquire sharp scanning data and is a practical scanner that boasts its premium-scanner-like performance involving adjustable-articulator-direct scanning, all-in-one scanning, interproximal scanning and impression scanning.   Features and Benefits Articulator ScanEDGE scanners can scan articulators directly.There is no hassle for users to scan the model separately from the articulator.All types of articulators can be scanned directly, from basic articulators to fully adjustable articulators.Impression ScanEDGE scanners can scan impressions.Various impression types can be scanned and the upper and lower data are matched automatically by using a scan target.This reduces the user's working time dramatically.EDGE can also utilize impressions in various ways.For example, you can combine impression and stone models, or scan impression to make gingiva data.Transfer Plate ScanEDGE scanners can use transfer plates.The transfer plate functions to accurately reproduce the position of the model attached to the articulator.It is used in conjunction with the exocad articulator module, which automatically places the model in the articulator automatically.Therefore, when designing teeth, the user can reproduce the mandibular movement and adjust the occlusion. All-in-One ScanThe All-in-One scanning method that shortens working time by 50%It enhances work productivity through scanning upper jaw, lower jaw and abutment teeth all at once. Basic accessoriesBase Plates (2qty)Multi-Die Plate (1qty)Calibration Plate (1qty)Gum Plates (2qty)Screw Jig Plate (1qty)Articulator Plate (1qty) Specifications Model swing mode Dual 1.3MP cameras Articulator-DIRECT scanning Transfer plate Interproximal scanning All-in-One scanning 395(W) x 275(H) x 400(D) mm 13kg Axis : 2 axis Light Source : White light LED Technology : Structured light Output Format : STL, OBJ, OFF Power : 100-240V(AC), 50-60 Hz O/S : Windows 7, 8.1, 10 (64bit) Accuracy : 10??m (The scanning accuracy may vary depending on the working environment or your model)          

Read more less

The price is inlcusive of GST.    This is PRICE MATCH Product! Call us if you have better price, We will Challenge to your price.     Try 3D Communication Tool - Exocad Webview. (Click here)   Exocad DentalCAD - for Dental Professionals Powered by passion, executed in excellence. Integrate, create, manufacture Sometimes, it's hard to know which new digital technology to choose in the world of dentistry. exocad's software has enabled tens of thousands of dental professionals worldwide to smoothly transition to digital production. We're proud of our customer satisfaction. Faster workflows, improved proficiency It's easy to use and to reach your high expectations Flexibility as you require it Reliability you can trust Independent & innovative Truly future-proof                    Bundle List and Add-on Modules (Perpetual and Rental are available)      EXOCAD (Dental CAD) Brochure Download

Read more less

This is a PRICE MATCH Product.  Call us if you have better price. We will challenge your price.      The price includes 1 exoplan with Guide Creator.  This is a yearly subscribed product, AUD 950+GST is annual update fee. (the price may differ due to foreign exchange rate.)    Exocad DentalCAD / ChairsideCAD / Exoplan-Powered by passion, executed in excellence.      Visualize, plan, create Sometimes, it's hard to know which new digital technology to choose in the world of dentistry. exocad's software has enabled tens of thousands of dental professionals worldwide to smoothly transition to digital production. We're proud of our customer satisfaction. Faster workflows, improved proficiency It's easy to use and to reach your high expectations Flexibility as you require it Reliability you can trust Independent & innovative Truly future-proof Mastering edentulous cases     Faster planning, fewer steps, more automation    EXOPLAN Brochure (Exocad Surgical Guide)    

Read more less

The Ultimate 3-Day Crash Course in Dental 3D Printing and Digital Design Sydney's premier dental 3D printing course is back again, and even more comprehensive than ever before, with now 3 day's worth of hands-on printing and digital design education. Learn how to integrate additive 3D printing technologies into your practice safely, efficiently and effectively! This course is designed for 'zero' experienced dentists, so that attendees with zero prior printing and design knowledge will be able to design and print all fundamental applications possible in general dentistry when they return to their practices.   The Speaker: Dr. Andrew Ip BDS, MRACDS (GDP), Grad Dip Orthodontics (JCU), MSc Implantology (IMC), PGrad Dip Digital Dentistry (IDDA) Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022.Nerd, geek, freak - he's been called it all.What was once a simple hobby now takes up a significant portion of his daily work.Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies   Course Curriculum  (DAY 1) 9 May 2025 (Friday) 9AM - 5PM 3D printers – an overview:      •Types of 3D printing technology       •Factors to consider when investing into 3D printing       •Design – in-house or outsource?      •What can we 3D print? The armamentarium:      •Printers       •Wash units       •Cure units       •The importance of validated protocols and the TGA Models:      •Basic model preparation for 3D printing – Medit Model app       •Nesting – positioning, angulation and supports Physical printing workflow:      •Printer set up       •Loading resin      •Washing      •Curing      •Material handling Print failures:      •Common failures       •What to do when there is a failure   (DAY 2) 10 May 2025 (Saturday) 9AM - 5PM 3D printed restorations – an overview:       •The case for 3D printed   restorations       •The physical properties of 3D   printed restorations      •Temporary vs Permanent – what   should I tell my patient? Design – the single crown:       •Live demo and hands-on exercise –   Medit ClinicCAD       •Live demo and hands-on exercise –   Dentbird AI      •Demo – Exocad Design – multi-unit bridge:      •Live demo and hands-on exercise –   Medit ClinicCAD     Design – 3DFreeForm (indirect palatal shells):      •Live demo and hands-on exercise –   MeditClinicCAD     Design – full dentures:      •Demo – Blue Sky Plan Design – injection moulding trays      •Live demo and hands-on exercise –   Medit ClinicCAD      Nesting and slicing:      •Proper orientation and supports   Post-print processing workflow:      •Washing      •Curing      •Polishing and/or characterization   (DAY 3) 11 May 2025 (Sunday) 9AM - 5PM Same-day splints:       •Live demo – from scan to design to print       •Hands-on exercise – splint design – Medit Splints       •Printing materials and considerations      •Post-processing Mouthguards:      •Why printed mouthguards      •Hands-on exercise – mouthguard design – Medit Design       •Printing considerations In-house clear aligners:      •Why in-house aligners       •Basic overview, workflow and practical considerations       •Design – who does what Guided surgery:      •Pro’s and Con’s of guided surgery       •What information do you need      •Settings – what do all these parameters mean?      •3D printing considerations – orientation, supports and post-print processing The single implant:      •Live demo and hands-on exercise – immediate extraction and surgical guide design – Blue Sky Plan       •Live demo – implant planning, surgical guide design and provisional restoration – Exoplan and ExocadImplant provisionalization:       •Live demo and hands-on exercise – Maryland bridge      •Live demo and hands-on exercise – nesbit/flipper   Course Details 9 - 12 May 2025  (FRI - SUN) 9AM - 5PM 7 CPD hours each / Total 21 CPD CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST each module (1 day) AUD 3,000 + GST for all modules (3 days) AUD 500 + GST for Additional Associate Dentist (or Auxiliary Staff) each module AUD 200 + GST for Lecture Retake each module Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience***    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588    *Images are designed by Pop Artist Painter, Dr. Andrew Ip.

Read more less

  4 per box Autoclavable up to 150 times Competible with i600, i700 and i700 Wireless          *The expected delivery time will be announced to customers by August.

Read more less

Web browser based - no installation required No license purchase  Pay As You Go - Free to design, pay when export 1 crown = USD 4 = about AUD 6.5 Do no purchase this product, pay in the system.  https://accounts-cm-medical.dentbird.com/Click here to experience the AI Crown Design.  

Read more less

Digital design of full dentures Our FullDenture Module provides a guided workflow for designing highly esthetical full dentures. Model analysis can be performed digitally. The results will drive an automatic full-arch tooth setup suggestion. FullDenture Module supports different type of production processes, including two-step-milling, printed denture bases and monolithic printed dentures (e.g. for try-ins). Take maximum advantage of the digital revolution in denture production! More information System requirements https://wiki.exocad.com/wiki/index.php/Hardware_Requirements Included product support 1 month from the date of purchase Included product introduction 60 minutes Delivery time Delivery takes place around 6 working days  

Read more less

High esthetic dentures with the Ivotion Denture System The design option for the Ivotion denture system is available as of DentalCAD 3.2 Elefsina.   The monolithic disc features both tooth and denture base materials and allows to fabricate customized complete dentures in one continuous milling process. The Shell Geometry is a data-based, three-dimensional tooth and dental arch geometry for maxillary and mandibular dentures. It is located within the Ivotion milling disk and defines the transition between the tooth and denture base material. During the intuitive CAD design, the dentures are individualized for each patient using the visualized shell geometry and placed in the disc for production.FullDenture Ivotion only works in conjunction with the FullDenture module and requires an additional tooth library from Ivoclar.Please contact Ivoclar at licenses@ivoclar.com for the tooth library and system requirements for production. More information System requirements https://wiki.exocad.com/wiki/index.php/Hardware_Requirements Included product support 1 month from the date of purchase Delivery time Delivery takes place around 6 working days  

Read more less

Create physical models from digital impression scans exocad’s Model Creator module helps you create physical models from intra-oral scan data or impression scans. Both the design of models with detachable segments (using premanufactured bases) and the design of monolithic  models (where the prepared die is either removable or a separate check die) are supported. Combined with our Implant Module, Model Creator enables you to create models with lab analogues and removable gingiva masks.    Different model/die styles available Choose between several different building plates for segmented models or plateless models. Style your dies as removable, or build a complete model with a second set of singular dies. Exported files are fully compatible with every open 3D printer and many of the market-leading 3D printer providers are supported with special parameter presets. Create models with implant analogs Design models for implant cases using lab analogs and even add removable gingiva masks, or use individual abutments you designed yourself as dies. Full arch, upper and lower models The highly intuitive wizard workflow guides you through each step of the design process. Even designing models for both jaws at once is straightforward and painless. Labeling your models Choose from a wide range of attachments and use as many of them as required. Several connections for articulator clips, positioning pins, stabilizing structures and even a tool for labellng your models are at your disposal. Hollow models enable extremely cost-efficient printing All model types can also be designed hollow, to save you material in the printing process. Additionally the hollow shape comes with a sill on the bottom to increase the strength of thin walls. More information System requirements https://wiki.exocad.com/wiki/index.php/Hardware_Requirements Included product support 1 month from the date of purchase Included product introduction 60 minutes Delivery time Delivery takes place between around 6 working days  

Read more less

Design removable partial denture frameworks With the partial framework module PartialCAD, exocad provides you with a digital solution for designing high-quality removable partial denture frameworks. Apply advanced design and customization features for meshes, major connectors, clasps, lingual aprons and finish lines. Enjoy the highest design flexibility offered by PartialCAD’s extensive features and functionality for l-bar retainers, post design with retention and auto-relief for optimal fit. With this module, you can combine partial frameworks with crown and bridge design elements and create support bars for printing. In addition, partial framework customizations with logos and text are possible. Outstanding design flexibility Our goal: everything that can be made in wax can also be designed using our software. As a consequence, PartialCAD provides unparalleled design freedom that will exceed the expectations of even the most demanding experts in partial design. More information System requirements https://wiki.exocad.com/wiki/index.php/Hardware_Requirements Included product support 1 month from the date of purchase Included product introduction 60 minutes Delivery time Delivery takes place around 7 working days  

Read more less

DOF Freedom X5 Model Scanner  CAMERA MOVING SYSTEM Since the camera moves around, no jig is required to fix a model. Fixing a model with a jig or flattening an uneven bottom of a model requires time. Camera moving mode can shorten working time significantly.     Complete Your Casein 3 Minutes Easier than 3-minute cooking with the lab scanner FREEDOM X5   1. The Fastest Scan Speed "Scan time" means the final data output time including scan and build.Other scanners require additional time for data building after scanning,but FREEDOM X5 significantly reduces the time because the scanningand building processes are performed simultaneously. 2. Skip the Model Fixing Process FREEDOM X5 is a scanner equipped with 5MP cameras and the patented camera moving system.This patent technology allows the cameras to move freely without fixing the model, so the scans are convenient and stable, and the dual UHD cameras produce sharp margin lines. Working time can be effectively reduced since the model fixing process is omitted. 3. Feel the Real 5MP Data FREEDOM X5's 5MP cameras deliver the sharpest and most accurate data.With DOF's technology, it is a premium lab scanner capable of scanningwith 5MP cameras and reproducing high-resolution 3D data.   Check out the real data from the 5MP scanner! " Scan time" refers to the final data output time including scan and build operations.FREEDOM X5 significantly reduces time because the scanning and building processes are performed simultaneously whereas other scanners require additional time for data building after scanning.Check data output speed which can be 200% faster than other scanners.   SIMPLE, SMART, and INTUITIVEScanning Software ScanApp is an intuitive and user-friendly software exclusively used for DOF scanners.A variety of complex clinical cases are quickly and easily scanned. Simple & Quick Scan with Buttons Use the buttons to begin scanning or move to the previous or next step. This reduces scanning time and increases work efficiency. Real Color Scan FREEDOM X5’s high-resolution cameras scan models in color. This technique is useful not only for margin lines, but also for partial model designs. Articulator Direct The occlusal relationship is reproduced as it is by scanning the mounted condition. A simple hinge articulator, which is commonly used in clinical practice, can also be used, thus, increases work efficiency.  

Read more less

***This is not a selling product, please DO NOT purchase this product.  Start Your own Design Work With Us! Click here to open an account with us!  Australian preferred design  Personalised parameter settings every time No pirate software  Turnaround time 24 hours    Crown/Bridge, Anterior Aesthetic, Digital Smile Design, Diagnostic Wax-up, Custom Abutment, Bar, All-on-X, Implant Immediate Restoration, Maryland Bridge, Night Guard, Splint, Surgical Guide, Clear Aligner, Indirect Bonding Tray, Denture, Partial Denture Frame, Individual Tray and more in 24 hours or rush 2 hours Quality Standards & Premium Service 24 hours turn around time Professional 200+ Full-time Dental Designersby30% of 5+ Years of Experience10% of 10+ Years of Experience   Click here to open an account! Click here to go to the design portal!   

Read more less

ioConnect Scanbody for All-on-X on Multi-Unit Abutment Superior Alternative to Photogrammetry- Achieve precise results without the high cost of photogrammetry systems. Effortless Intraoral Experience- Designed for patient comfort, ensuring seamless use for clinicians. Consistent High Accuracy- Delivers repeatable and reliable scans every time, reducing remakes and adjustments. Streamlined Workflow in Exocad & 3Shape- Easily integrated into popular CAD platforms, boosting efficiency and minimizing learning curves.   Competible System   NovelBiocase MUA and Screw M1.4     Product Package MUA Detectors S, M, L x 4 PCS in each size  HS Caps x 12 PCS  1.27 Hex Hand Driver       ioConnect Workflow - 3Shape & Exocad    Watch the iO-Connect in Action: Waxup scan & Exocad by MOD      

Read more less

Exocad Training - Smile Design and Snap On      The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 2 May 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

Exocad Training - Crown and Bridge Considering Manufacturing Process     The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 13 June 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

Single Unit Printed and Milled - Single and Ready to Mingle Swipe Right on In-House Indirect Dental Restorations! It’s a big ocean out there and everyone’s looking for their fish. Calling out all you dental pros who know the struggle of getting indirect single-unit restorations right! Are you tired of dealing with outdated methods and longing for some real precision in your life? Well, honey, it’s time to ditch the drama and upgrade your game!"Single and Ready to Mingle" is your match made in dental heaven and is the first event for a reinvigorated Bread and Butter Digital Dentistry Study Club – a sassy, hands-on educational program where milling and 3D printing come together to create the perfect restoration every time.   What’s in it for You? Flawless Workflow: Learn how to mill and print like a pro—no ghosting, no excuses. Swipe-Worthy Results: Create single-unit restorations so stunning with simple and replicable staining techniques, they’ll have your patients smiling ear-to-ear. Tech with Benefits: Get cozy with the latest gadgets and software that make your job easier (and way more fun). We’ve got the tools, the tech, and the vibes. All we’re missing is you! Get ready to mill, print, stain and glaze darlings! Who’s Invited? Dentists, lab techs, and anyone in the dental world who wants to level up their skills and have a little fun while doing it. Don’t ghost us—RSVP today! The Speaker: Dr. Andrew Ip BDS, MRACDS (GDP), Grad Dip Orthodontics (JCU), MSc Implantology (IMC), PGrad Dip Digital Dentistry (IDDA) Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022.Nerd, geek, freak - he's been called it all.What was once a simple hobby now takes up a significant portion of his daily work.Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies   Course Curriculum  Introduction to in-house CAD/CAM Hardware,   software and materials Advantages, disadvantages and considerations Crash course on milled restorative materials Wet   vs dry milling Non-fired materials Fired materials Crash course on 3D printed restorative materials Indications   and limitations Print considerations and workflow Design – hands-on with crowns, onlays and inlays Medit   ClinicCAD Dentbird AI Exocad Post-processing Polishing   vs staining – demo Staining an anterior crown – hands-on Staining a posterior tooth – hands-on Polishing a posterior crown – hands-on   Course Details 13 June 2025  (Sunday) 9AM - 5PM 7 CPD hours each / Total 21 CPD CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST each module (1 day) AUD 500 + GST for Additional Associate Dentist (or Auxiliary Staff) each module AUD 200 + GST for Lecture Retake each module Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience***    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588    *Images are designed by Pop Artist Painter, Dr. Andrew Ip.

Read more less

Exocad Training - Full Denture BASIC     The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 11 July 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

Exocad Training - Full Denture INTERMEDIATE     The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 8 August 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

Exocad Training - Full Denture ADVANCE     The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 5 September 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

Exocad Training - Partial Denture BASIC     The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 12 September 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

Exocad Training - Partial Denture ADVANCE     The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 17 October 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less